1: Fragrant core soaked in water
Grasp a flat bamboo stick with your hand, dip it in water along the length of the fragrant meat section, and rub it with sticky powder. Clean bamboo branches should be soaked in water, leaving a fragrant foot length of 10-12 centimeters, and the area where they are held should not be wet.
2: Rub on sticky powder (base layer)
Make the bamboo branches evenly coated with sticky powder. Rub the adhesive powder onto the moist fragrance core. *Step and two steps are collectively referred to as the base layer, which is called * immersion (commonly known as one water).
3: Immerse in water (upper inner powder)
Moisture makes the sticky powder sticky, allowing it to adhere to the fragrance powder. Soak the base of the incense sticks in water until they are at the same height as the sticky powder.
4: Exhibition Fragrance
Spread the soaked fragrant branches into a fan-shaped shape to separate them, and then sprinkle the spice powder on the branches to evenly adhere each fragrance. And by dividing it into a fan-shaped shape, defective fragrances can be picked out.
5: Swing incense
After sprinkling the fragrance powder on the display, use both hands and palms to roll the fragrance in a circular shape, so that the fragrance powder evenly adheres to the branches and timely picks out any defective fragrance.
6: Cut it
Bend your right palm and right arm around the fragrant branch, with your left hand on top, to make the branch more firm and smooth.
7: Drying incense
Evenly interweave the prepared bamboo strips and hang them on a fragrance rack or directly place them on the ground as fragrant flowers to facilitate ventilation and sun exposure, allowing the fragrance to dry evenly until 70% dry.
Stamping fragrant flowers is a scenic spot made of Yongchun bamboo sticks. First, tie the bamboo sticks into a bundle, stand them on the ground, gently support them with both hands, and quickly turn them to one side. With a slight adjustment, the bamboo sticks will bloom in the shape of an open flower on the ground.
8: Fragrant Feet
After drying the incense to 70% dryness, put it away and flatten it. Dip the foot of the incense in red dye and dye it.
9: Sunbathing fragrant feet
Dry the dyed fragrant feet from head to head on a fragrance rack, shake the rack evenly while drying, and flip it along with the fragrance. Once it becomes monotonous, it becomes a natural fragrance.
Article source: Jiangmen bamboo stick fragrance manufacturerhttp://www.dongfangxl.com/
09-30
What are the structures of bamboo stick incense?
Bamboo stick incense, also known as string incense, stick incense, or standing incense in Taiwan, and bamboo stick incense in mainland China, is named after its use of bamboo branches, cinnamon bamboo
09-30
Incense Manufacturer: Craftsmanship for Making Bamboo Stick Incense
The ancients discovered that any type of spice has the effects of refreshing and calming the mind, so the history of incense burning in China has been over 3000 years, and China can be considered one
09-08
Fragrant powder and spice factory: production techniques for bamboo stick fragrance
Nowadays, when making bamboo stick incense, the following methods should be used first:1. Traditional craftsmanship involves hand pouring fragrance.2. Handmade powder coating and mechanical bucket mak
08-26
Fragrant powder and spice factory: How to distinguish the quality of bamboo stick fragrance?
We call fragrances made from natural spices "natural fragrances", fragrances with artificially synthesized spices "chemical fragrances", or perhaps "fragrance crafts". Chemical fragrance only has the