The production process of fragrant bamboo sticks is as follows:

Sawing bamboo: Using a bamboo saw machine to saw the original bamboo into the required standard length. The bamboo saw machine is mainly composed of a frame, a motor, a saw blade, and a transmission mechanism. There are two types of saws used: general saw blades and alloy saw blades.

Bamboo breaking: A bamboo breaking machine is used to cut open sawn bamboo. The number of slices to be cut depends on the width of the bamboo slices required. Therefore, bamboo breaking machines are equipped with multiple cutting tools, and different cutting tools are selected according to the needs of the product and the size of the bamboo, making it convenient to change the tools.

Opening: The opening machine can be used to remove the protruding nodes in the outer garden of bamboo, and the green and yellow removal machine allows the bamboo slices to pass through two cutting tools, removing the outer layer of bamboo green and the inner layer of bamboo yellow, and making bamboo slices.

Wire drawing: The wire drawing forming machine is an important and common equipment in the processing of fragrant bamboo sticks. It generally consists of a frame, two motors (feeding motor and tool drive motor), feeding wheel, tool, and transmission system. The universality of the molding machine is good, and it only needs to replace the cutting tools to meet the needs of different products.

Sawing and polishing: The sawing machine is used to cut the bamboo wire into the required length for making incense, and then polish it on the polishing machine.

Article source: Jiangmen bamboo stick fragrance manufacturerhttp://www.dongfangxl.com/