1、 Mixing. Put various materials and water into the mixer in a certain proportion. The structure of a general mixer is very simple, with blade claws inside the mixing drum. Through the rolling of the blade claws, the mixed material is evenly mixed. The mixing of ingredients is crucial throughout the entire fragrance making process, which requires experience. First, dry the ingredients and mix them evenly, with appropriate proportions and moisture.

2、 Knead and shape. This process is completed by a fragrance making machine. The current fragrance making machine is mainly composed of a hydraulic system kneading material tank and a mold. Put the mixed material into the hopper and knead it downwards through the hydraulic system. The compressed material is extruded from the mold hole and becomes the desired shape. Nowadays, fully automatic incense machines with dual feeding slots are used, which can save the waiting time for the incense machine to load. A mold is a strip steel plate with many holes arranged in rows, including one, two, or more rows. The most commonly used is the second row of holes. So the extruded incense sticks are also arranged in rows.

3、 Pick up the incense and tidy up. We need to use Xiangluo here. Xiangluo is usually made of wooden strips to form a rectangular frame, with plastic mesh stretched on top. Used to store incense sticks for easy exposure to sunlight and drying.

The molded incense sticks need to be dehydrated and dried before they can be packaged and sold. It is generally divided into two types: natural dryness and drying room dryness. Now there are also heat pumps that are boring.

The dry drying room is mainly used by large fragrance factories. The commonly used one is the drying room. In a well insulated room, use methods such as a heated kang, heater, and stove to heat it up. Place the molded incense sticks on the incense rack in the drying room. The drying room has ventilation equipment to facilitate the removal of moisture. The temperature inside the room is about 40 degrees Celsius, and it usually takes a few hours to produce fragrance. First in, first out, cyclical production. Another issue is that using a heat pump can be tedious, usually costing tens of thousands of yuan per set of equipment, but it is relatively labor-saving.

Small fragrance factories often use natural dryness. Can be exposed to direct sunlight on the premises or dried indoors. It depends on the specific situation. Exposure to direct sunlight can become dry quickly, but it is prone to deformation. When exposed to direct sunlight, the upper part of the incense stick loses moisture quickly and shortens quickly, causing the ends of the stick to tilt upwards. After the upper part becomes dry and fixed, the shortening force of the lower part is not enough to pull the already fixed upper part, and ultimately the incense stick becomes twisted. During the sun exposure process, you can sprinkle some water on top of the incense sticks to control and reduce deformation. Yin dry means placing fragrant Luo on an indoor incense rack for natural ventilation. Long drying time and small deformation.

If the deformation is significant, the incense sticks can be removed in rows and interwoven and stacked together. After a period of time, it can have a corrective effect.

The dried incense sticks can be packaged. There are also various types of packaging, generally more frugal. Just bundling the incense sticks into bundles is a bit sophisticated, here's a simple introduction. The cross-section of a typical incense stick is a symmetrical hexagon, and not a regular hexagon. The regular hexagon reduces two symmetrical sides. But this is not clearly defined, perhaps it's just a habit! So you can definitely tie it into a regular hexagon, or reduce the four sides, etc. After packaging, it is a complete product.

Article source: Jiangmen bamboo stick fragrance manufacturerhttp://www.dongfangxl.com/